Völkl International | Snowboards

agile & playful - Directional Twin-Tip Sidecut
forgiving & more float - Easy Rocker Shape
robust & stable - Shock Absorber & V-Flex Inlays

PARTIAL GRIP-LACQUER
PARTIAL GRIP-LACQUER

It’s both a stylish design feature and integrated stomp pad! Depending on the design, there are coarse or finer grains inside the lacquer – with or without glitter… Benefit from a unique look and bulletproof grip!
- SQUAD PRIME
TIP-TO-TAIL SUPREME WOODCORE
TIP-TO-TAIL SUPREME WOODCORE

Our Tip-to-Tail Supreme Woodcore is made of strips of Aspen-Falcatta wood with four strips of Falcatta being integrated in the Aspen core. Combining these gives the core the best dampening and flex properties, providing outstanding performance.
SLIM-TIP CONSTRUCTION
SLIM-TIP CONSTRUCTION

Unlike a conventional sandwich construction, the Slim-Tip Construction incorporates a solid and shock-absorbing urethane inlay in the nose and tail sections instead of ABS sidewall material. Benefits include a stylish, slimmer nose, reduced swing- and overall weights for better board control – perfect for all riders, not just for high-speed rotations in the park!
- SQUAD PRIME
TRADITIONAL SHOCK ABSORBER
TRADITIONAL SHOCK ABSORBER

This consists of one single hard wood layer. It is not milled into the core but inserted where the core tapers down. Together with a V-Flex inlay the Shock Absorber makes the board stronger with better torsion properties.
DIRECTIONAL TWIN-TIP SIDECUT
DIRECTIONAL TWIN-TIP SIDECUT

Our brand new sidecut combines the twin-tip freestyle characteristics with the advantages of a directional stance. The insert positions have a minimal setback of 10 mm. You will hardly notice the setback when riding switch, but in the backcountry and on icy slopes it provides more edge pressure and better grip! 2 in 1: All-Mountain and Freestyle characteristics when riding the backcountry, while being a classic twin-tip board for the park if set up with 0 mm setback.
EASY ROCKER
EASY ROCKER

The minimal rocker shape makes the board low-key on the slope but it unfolds its full potential in the backcountry and in the park. Easy to handle, extremely lively and forgiving. Newcomers to the Rocker technology can carve on the slope like they used to and enjoy a perfect ride in the powder, but at the same time there is no more edge-catching slams on jumps. The best shape for heaps of fun and fast progression!
5x2 INSERT SYSTEM
5x2 INSERT SYSTEM

Generally you’re dealing with one of three insert systems: 4x4, 5x2 or 6x2. With a 4x4 system, the inserts are 4 cm apart. With the 5x2 and 6x2 Insert Systems, the insert rows are separated by 2 cm only. This way the stance can be set more exactly – down to the precise centimeter. The 6x2 Insert System is specifically employed in our top freestyle boards to offer individual binding placement. Adjustments on binding discs will be limited to the centering of bindings.
SANDWICH CONSTRUCTION
SANDWICH CONSTRUCTION

Located between the upper and lower beams on the board’s sides is an ABS synthetic sidewall which has been integrated to directly transmit pressure from the binding onto the edge without loss of power. The board gives a very responsive feel, providing maximum edge grip and the smoothest ride possible.
- SQUAD PRIME
TRIAXIAL FIBERGLASS WEAVE IN UPPER AND LOWER BEAM
TRIAXIAL FIBERGLASS WEAVE IN UPPER AND LOWER BEAM

This special fiberglass weave has fibers that have been positioned at a 45° angle (+45°/-45°) in addition to running nose to tail. Depending on the density of the woven fiber, torsion and flex are enhanced without influencing the wood core’s thickness. This reduces weight, which delivers responsiveness and better edge grip.
- SQUAD PRIME
V-FLEX FIBERGLASS WEAVE
V-FLEX FIBERGLASS WEAVE

The V-Flex weave is a triaxial fiberglass weave with increased fiber density. The special V-form reinforces the area around the bindings, producing improved flex and torsion properties. It also provides optimal distribution of power to the edge of the board. This provides better stability when strain and forces are strong.
- SQUAD PRIME
BACK-SCREENING AND DIE-CUT
BACK-SCREENING AND DIE-CUT

The combination of Die-Cut and silk-screened bases enables us to achieve awesome graphics. By composing colorful and silk-screened bases via Die-Cut we achieve stunning 3D effects.
HIGHLY TRANSPARENT, EXTRUDED SUPER-CLEAR BASE
HIGHLY TRANSPARENT, EXTRUDED SUPER-CLEAR BASE

For brilliant colors and almost total transparency! The “Super-Clear” Base is used for all silk-screened base graphics. In addition to this the base is low-maintenance and very durable.
DIE-CUT
DIE-CUT

Our ultrasound cutting machine cuts out differently colored pieces of the base, which are then manually put together like a jigsaw. A combination of multi-colored base components gives the design individuality and character.
- SQUAD PRIME
DIAMOND FINISH
DIAMOND FINISH

A diamond finish is now standard on all our boards (except those equipped with a Convex Powder Base or Convex Slide Base). The edges are ground so that they extend 1° down from the base and 1° out from the sides. The diamond finish not only makes the edges more durable but also provides maneuverability and great edge hold in icy conditions.
- SQUAD PRIME
NATURAL WAX FINISH (BIODEGRADABLE)
NATURAL WAX FINISH (BIODEGRADABLE)

After positive tests in our Race Lab, all Völkl boards now get a finish with HOLMENKOL's “Natural Wax”. Good news for all riders who are looking for a biological wax with excellent gliding characteristics. It doesn’t include paraffin, is made of sustainable resources and biodegradable. Those who want to take extra care of their boards with a green consciousness, can buy HOLMENKOL's “Natural Wax” in normal packaging sizes in the specialized trade.
- SQUAD PRIME